Water filters play a crucial role in maintaining the quality and taste of the water dispensed from your GE fridge. Regularly resetting and changing the water filter ensures that your fridge works efficiently and provides safe drinking water. Neglecting to reset the water filter can lead to a buildup of contaminants, which can affect your health and the performance of your appliance.

In this blog post, we will cover everything you need to know about how to reset water filter on GE fridge.

We will also cover some best water filters for your GE Fridge, maintenance tips, and much more!

Identifying Your GE Fridge Model

Before you can reset your water filter, it is essential to identify your GE fridge model. The model number is typically located on the inside wall of the refrigerator, either on a sticker or a metal plate. Knowing your fridge’s model will help you understand the specific water filter system it uses and locate the water filter within the appliance.

Understanding the Water Filter System in Your GE Fridge

The filter cartridge, filter housing, and water lines are all critical components of your GE refrigerator’s water filtration system. Water is circulated through the filter cartridge, which removes pollutants and impurities like chlorine, silt, and bacteria. You should replace your water filter every six months, or as the manufacturer recommends.

How to Locate Your GE Fridge Water Filter

The location of the water filter in your GE fridge depends on the model type. Here are the general locations for each model:

• Top-freezer models: The water filter is typically located in the upper right corner at the back of the fridge.
• Bottom-freezer models: The water filter can be found in the refrigerator section at the top right corner or behind the bottom crisper drawer.
• Side-by-side models: The water filter is usually located behind the bottom grille in the bottom right corner of the fridge.
• French-door models: The water filter is commonly placed in the refrigerator section at the top right corner.

Preparing to Reset the Water Filter

Before resetting your water filter, gather the necessary tools and materials to catch any water spills, such as a replacement filter cartridge and a towel. Please turn off the water supply to the fridge by locating the shut-off valve and closing it. Finally, ensure a clean and safe workspace to avoid accidents.

Removing the Old Water Filter

To remove the old water filter, follow these instructions based on your fridge model:

• Top-freezer models: Twist the filter counterclockwise and pull it out gently.
• Bottom-freezer models: Release the filter by pressing the release button and pulling it out.
• Side-by-side models: Turn the filter counterclockwise and pull it out from the bottom grille.
• French-door models: Push the filter inward and twist it counterclockwise to remove it.

Installing the New Water Filter

Choose a compatible replacement filter for your GE fridge model when installing the new water filter. Follow the instructions for your specific model as listed in the previous section, but reverse the process.

How To Reset Water Filter on GE Fridge?

Determine the Filter Type

Find the specific type of water filter compatible with your GE refrigerator model. This information can be found in the refrigerator’s user manual or on the GE Appliances website.

Purchase a Genuine GE Filter

To ensure optimal performance and compatibility, buying genuine GE water filters is recommended. You can buy them both online and offline. 

Here are a few of the most useful GE water filters online:

• GE RPWFE Refrigerator Water Filter: This filter removes 50+ contaminants, including lead, chlorine, cysts, herbicides, and pesticides. It is certified by NSF 42, 53, and 401. It has a filter life of 300 gallons and a flow rate of 0.5 GPM. 
• Waterdrop DA29-00020B Refrigerator Water Filter: This filter is compatible with GE and Samsung refrigerators. It removes chlorine, lead, mercury, arsenic, and other impurities. It is certified by NSF 42 and 372. It has a filter life of 300 gallons and a flow rate of 0.5 GPM.
• Culligan IC-EZ-1: This filter is an in-line filtration system that can be installed on any refrigerator with a water dispenser or icemaker. It reduces chlorine, bad taste, odor, sediment, and scale. It is certified by NSF 42 and has a filter life of 3,000 gallons, or 12 months.

According to Amazon, these are some of the best refrigerator GE water filters.

Locate the Filter

Depending on your refrigerator model, the location of the water filter may vary. However, it is typically found inside the refrigerator compartment or in the grille at the base of the refrigerator.

Prepare for Filter Replacement

Before replacing the filter, it’s essential to turn off the water supply to the refrigerator. Locate the shutoff valve behind the fridge or under the sink and close it to prevent water leakage.

Remove the Old Filter

Twist the old filter counterclockwise to detach it from the filter housing. Pushing the release button or pulling on a cap to remove the filter might be necessary. Place a towel or tray underneath to catch any water that may spill.

Install the New Filter

Take the new GE water filter and align the arrow with the arrow on the filter housing. Insert the filter into the housing and twist it clockwise until it locks into place. Make sure it is securely installed.

Reset the Filter Indicator Light

After replacing the filter, you may need to reset the filter indicator light to ensure accurate monitoring. Resetting the indicator light may vary based on the refrigerator model. Normally, you can do one of the following:

• Press the “Reset” or “Filter Reset” button on the refrigerator control panel for 3 to 5 seconds.
• Consult your refrigerator’s user manual for specific instructions on resetting the filter indicator light.

Turn on the Water Supply

Once the filter is replaced and the indicator light is reset, open the shutoff valve to restore the water supply to the refrigerator.

The frequency of filter replacement relies on your water quality and usage. As a general guideline, GE recommends replacing the water filter every 6 months, or after filtering approximately 300 gallons. However, if you notice a decrease in water flow or a change in the taste or odor of the water, it’s a good idea to replace the filter earlier.

Refer to your specific refrigerator model’s manual for detailed instructions and guidelines regarding filter replacement and resetting the filter indicator light.

Troubleshooting Common Issues

If you run into any problems while resetting the water filter, use these troubleshooting steps:

• If the indication does not reset after changing the filter, disconnect the refrigerator for a minute and reconnect it.
• Check that the water filter is correctly fitted and placed in the housing if it leaks. If the problem persists, examine the filter and housing for damage and replace them as needed.
• Check for kinks in the water line or obstructions in the filter if you still have low water pressure after resetting the filter. If required, replace the filter.
• If you notice a strange taste or odor in the water after resetting the filter, flush it correctly according to the manufacturer’s recommendations. If the problem persists, think about changing the filter.

Maintenance Tips for Your GE Fridge Water Filter

To keep your GE fridge water filter system in optimal condition, follow these maintenance tips:

• Regularly check the filter status indicator and reset it as needed.
• Clean the filter housing when changing the filter to remove any debris or buildup.
• Extend the life of your water filter by limiting hot water, which can cause sediment buildup.

Environmental Considerations

Observe your local requirements for safe disposal to reduce the environmental impact of old water filters. Additionally, consider using reusable filters to avoid plastic waste and encourage sustainability.

Everything You Need to Know About GE Refrigerator Water Filters

Here are some facts and statistics about GE refrigerator water filters, water quality, contamination, and how a water filter can sweeten the taste and safety of your drinking water:

GE Refrigerator Water Filters

• GE refrigerator water filters are designed specifically for use in GE refrigerators with built-in water dispensers and ice makers.
• These filters are certified to meet various industry standards, such as NSF/ANSI 42 and NSF/ANSI 53, which ensure the reduction of specific contaminants in drinking water.
• GE refrigerator water filters use a combination of activated carbon and other filtration media to remove impurities from water, providing cleaner and better-tasting drinking water.

Water Quality and Contamination (General)

• Water quality can vary depending on the source and geographical location. Even treated municipal water can contain contaminants.
• Typical contaminants in water include chlorine, sediment, heavy metals (e.g., lead, mercury), volatile organic compounds (VOCs), pesticides, and microbial pathogens.
• Contaminated water can have adverse health effects, including gastrointestinal issues, reproductive problems, and long-term chronic diseases.

Benefits of Using a Water Filter

Improved taste and odor

Water filters remove chlorine, sediment, and other contaminants that can affect the taste and smell of water, resulting in fresher and better-tasting drinking water.

Reduction of contaminants

Water filters can effectively reduce or remove harmful substances, including chlorine, lead, mercury, VOCs, and microbial pathogens, making water safer to consume.

Health protection

By removing contaminants, water filters provide additional protection against waterborne illnesses and long-term health risks associated with certain pollutants.

Convenience and cost savings

Installing a water filter in your refrigerator eliminates the need to purchase bottled water, offering convenience and potential cost savings in the long run.

Environmental benefits

Using a water filter reduces plastic waste from single-use water bottles, contributing to a more sustainable and eco-friendly lifestyle.

It’s important to note that specific GE refrigerator water filters may have different capabilities and certifications, so it’s advisable to refer to the product specifications and certifications provided by GE for accurate information on the filtration capabilities of their specific models.

Benefits of Regularly Resetting Your Water Filter

Resetting your GE fridge water filter regularly provides several benefits, including:

• Improved water taste and quality, as contaminants are effectively removed.
• Extended appliance lifespan, as a clean filter system prevents clogging and other issues.
• Enhanced efficiency and reduced energy consumption since a well-maintained filter system requires less effort from your fridge to dispense water.

3 Best Water Filters for GE Fridge

When comparing different types of water filters, such as carbon, reverse osmosis (RO), and ultraviolet (UV), it’s essential to consider their mechanisms of action, efficiency, and overall performance. Each kind of filter has its benefits and limitations.

1. Carbon Filters

Carbon filters effectively remove contaminants like chlorine, sediment, and volatile organic compounds (VOCs). They work by adsorbing impurities onto the surface of activated carbon. While carbon filters improve taste and odor, they may be less effective in removing certain minerals, heavy metals, or microorganisms.

2. Reverse Osmosis (RO) Filters

RO filters employ a semi-permeable membrane to remove many contaminants, including dissolved solids, heavy metals, bacteria, viruses, and certain chemicals. The filtration process involves applying pressure to force water through the membrane, leaving behind impurities. RO filters provide a high level of purification, but they can be relatively slow and may waste considerable water during the process.

3. Ultraviolet (UV) Filters

UV filters utilize ultraviolet light to disinfect water by inactivating harmful microorganisms such as bacteria, viruses, and parasites. UV filters are highly effective in killing or deactivating these organisms, ensuring the water is safe to drink. However, UV filters do not remove other types of contaminants like chemicals, heavy metals, or sediments.

As for GE water filters, they are known for their superior performance and durability due to several reasons:

Advanced Filtration Technology

GE water filters often incorporate multiple stages of filtration, combining different technologies to maximize effectiveness. Depending on the specific model, they may include activated carbon filters, RO membranes, and UV disinfection. This comprehensive approach ensures the removal of a wide range of impurities.

Certification and Compliance

Independent organizations such as NSF International certify GE water filters frequently. Certification ensures that the filters meet strict standards for contaminant reduction and overall performance. By choosing a certified GE water filter, you can have confidence in its capacity to provide clean and safe drinking water.

Longevity and Durability

GE water filters are designed to have a long and durable lifespan. They are generally made with high-quality materials and undergo rigorous testing to ensure reliability. Long-lasting filters save you money and reduce the frequency of filter replacements.

User-Friendly Features

GE water filters often have user-friendly features such as easy installation, filter change indicators, and compatibility with various faucet types or refrigerator models. These features enhance convenience and usability for consumers.

Brand Reputation

GE is a well-established and reputable brand in appliances and water treatment. Their extensive experience and commitment to quality contribute to the trust and reliability of their water filters.

It’s worth noting that choosing the most suitable water filter depends on your specific needs and the quality of your water supply. Conducting water tests or consulting with water treatment professionals can help determine the contaminants present and guide you in selecting the appropriate filtration system.

Conclusion

Resetting your GE fridge water filter is a crucial maintenance task that ensures the quality of your drinking water and the efficiency of your appliance.
Following this comprehensive guide, you can easily reset your water filter and enjoy the benefits of clean, great-tasting water.

FAQs